COMPRESSOR + VALVE + TANK

ENDO-CVTTM (COMPRESSOR + VALVE + TANK)

AccuAir's patent pending ENDO-CVTTM takes streamlined appearance and ease of installation to an entirely new level by integrating the industry's first air compressor within the air tank as well as integrating the air spring solenoid valves directly into the air tank end caps themselves. Yet, the ENDOTM is far more than just components moved inside the air tank (which only consume 0.5 gallons of volume)... AccuAir partnered with WABCO to bring the quietest, most efficient, and moisture free air compressor that the market has ever seen. This single compressor does the work of two industry standard units at 200 psi. The ENDO-CVTTM also represents AccuAir’s next generation of solenoid valve technology that includes VFCTM (variable flow control) in addition to D.O.T. approved fully filtered and rebuild-able FFPTCTM (fully-filtered push-to-connect) fittings.

INTERNAL WABCO COMPRESSOR

The internal WABCO compressor refills the tank with completely dry air at a rate twice as fast as the current market standard compressor.

DUAL STAGE ISOLATION

The patent pending primary and secondary isolation system that softly suspends the compressor inside the tank, eliminating compressor vibrations from being transmitted into the vehicle's body or chassis.

DIGITAL INTELLIGENCE

Internal ECU monitors tank pressure, compressor head temperature, and ambient moisture levels to optimize compressor operation, provide maximum duty cycle, as well as regenerate the built-in desiccant air dryer as required.

VALVE-INTEGRATED TANK CAPS

Includes the solenoid valves and air tank all in one easy to mount package.

4-CORNER & 2-CORNER

Available in 4-corner and 2-corner configurations.

UPGRADE TO CVT

All ENDO-TTM and ENDO-VTTM tanks can easily be upgraded to ENDO-CVTTM without any fabrication or modifications.

VALVE + TANK

ENDO-VTTM (VALVE + TANK)

AccuAir's patent pending ENDO-VTTM takes streamlined appearance to an entirely new level by integrating the solenoid valves and manifold directly into the air tank end caps themselves. The ENDO-VTTM also represents AccuAir's next generation of solenoid valve technology that includes VFCTM (variable flow control) in addition to D.O.T. approved fully filtered and rebuild-able FFPTCTM (fully-filtered push-to-connect) fittings.

VALVE-INTEGRATED TANK CAPS

Includes the solenoid valves and air tank all in one easy to mount package.

DOT PTC FITTINGS

Built-in D.O.T. approved and rebuild-able Push-To-Connect fittings.

FILTERED PORTS

Filtered Ports: FFPTCTM (fully-filtered-push-to-connect) air fittings eliminate the risk of debris-induced valve problems common with all other solenoid valves on the market.

ADJUSTABLE FLOW CONTROL

Built-in VFCTM (variable flow control) adjusters allow for end user adjustment of the speed of each corner and each direction individually.

ENDOTM UPGRADE

Upgradeable with all other ENDOTM Technologies now or in the future.

4-CORNER & 2-CORNER

Available in 4-corner and 2-corner configurations.

ALL-IN-ONE

Includes the solenoid valves and tank all in one easy to mount package.

FLOW CONTROL

Built-in VFCTM (variable flow control) adjusters allow for end user adjustment of the speed of each corner and each direction individually. The result is a vehicle that will always move up and down level from front to rear and at the speed desired by the end user.

FULLY FILTERED

Built-in D.O.T. approved and rebuild-able FFPTCTM (fully-filtered-push-to-connect) air fittings eliminate the risk of debris-induced valve problems common with all other solenoid valves on the market.

AIR TANK

ENDO-TTM (AIR TANK)

AccuAir's ENDO-TankTM is the backbone of the ENDOTM platform and although it is the simplest product in the line, its features and quality make it the perfect centerpiece to an air management system and will be ready for modular upgrade when you are. Extruded from aerospace grade aluminum and assembled with ultra-high-strength bolts, this weld-less tank is proven to be free from leaks in addition to having precision machined fit and finish. Flush ports and mounting points are CNC-machined directly into the patent pending aluminum body. Modular construction allows the end-caps to be removed allowing for never before imagined feature combinations to go inside the tank when you're ready to upgrade.

BOLTED CONSTRUCTION

Modular and bolted construction makes disassembly possible for upgrades.

DOT RATED AND TESTED

The only DOT Approved Aluminum air tank for air suspension. Certified to 200 psi and tested to an incredible 1324 psi burst pressure.

NO WELDS

Weld-less construction prevents leaks.

ENDOTM QUICK RELEASE

Included ENDO-QRTM quick release mounting system allows easy installation and even easier air management assembly outside the vehicle.

EXTRUDED INTERNAL RIBS

Extruded internal rails house embedded mounting locations along the tank providing clamp-less attachment of ENDO-MountTM brackets and accessories.

ENDOTM UPGRADE

Upgradeable with all other ENDOTM Technologies now or in the future.

MOUNTING OPTIONS

Bottom or top mountable.

MADE AND ASSEMBLED IN USA

Made in the USA with a limited lifetime warranty.





PREMIUM FINISHES

Available in: Gray Cerakote, Bronze Cerakote, Black Cerakote and Raw Aluminum

PRICING
ENDO-T
(Tank Only)
5-Gallon Tank Raw AA-ENDO-T5-RAW $249.00
Black Cerakote AA-ENDO-T5-BC $299.00
Gray Cerakote AA-ENDO-T5-GC $299.00
Bronze Cerakote AA-ENDO-T5-BRC $299.00
3-Gallon Tank Raw AA-ENDO-T3-RAW $219.00
Black Cerakote AA-ENDO-T3-BC $259.00
Gray Cerakote AA-ENDO-T3-GC $259.00
Bronze Cerakote AA-ENDO-T3-BRC $259.00
ENDO-VT
(Valve + Tank)
5-Gallon Tank 4-Corner Valves Raw AA-ENDO-VT45-RAW $799.00
Black Cerakote AA-ENDO-VT45-BC $849.00
Gray Cerakote AA-ENDO-VT45-GC $849.00
Bronze Cerakote AA-ENDO-VT45-BRC $849.00
2-Corner Valves Raw AA-ENDO-VT25-RAW $555.00
Black Cerakote AA-ENDO-VT25-BC $605.00
Gray Cerakote AA-ENDO-VT25-GC $605.00
Bronze Cerakote AA-ENDO-VT25-BRC $605.00
3-Gallon Tank 4-Corner Valves Raw AA-ENDO-VT43-RAW $769.00
Black Cerakote AA-ENDO-VT43-BC $809.00
Gray Cerakote AA-ENDO-VT43-GC $809.00
Bronze Cerakote AA-ENDO-VT43-BRC $809.00
2-Corner Valves Raw AA-ENDO-VT23-RAW $525.00
Black Cerakote AA-ENDO-VT23-BC $565.00
Gray Cerakote AA-ENDO-VT23-GC $565.00
Bronze Cerakote AA-ENDO-VT23-BRC $565.00
ENDO-CT
(Compressor + Tank)
5-Gallon Tank Raw AA-ENDO-CT5-RAW $999.00
Black Cerakote AA-ENDO-CT5-BC $1049.00
Gray Cerakote AA-ENDO-CT5-GC $1049.00
Bronze Cerakote AA-ENDO-CT5-BRC $1049.00
3-Gallon Tank Raw AA-ENDO-CT3-RAW $969.00
Black Cerakote AA-ENDO-CT3-BC $1009.00
Gray Cerakote AA-ENDO-CT3-GC $1009.00
Bronze Cerakote AA-ENDO-CT3-BRC $1009.00
ENDO-CVT
(Compressor + Valve + Tank)
5-Gallon Tank 4-Corner Valves Raw AA-ENDO-CVT45-RAW $1599.00
Black Cerakote AA-ENDO-CVT45-BC $1649.00
Gray Cerakote AA-ENDO-CVT45-GC $1649.00
Bronze Cerakote AA-ENDO-CVT45-BRC $1649.00
2-Corner Valves Raw AA-ENDO-CVT25-RAW $1325.00
Black Cerakote AA-ENDO-CVT25-BC $1375.00
Gray Cerakote AA-ENDO-CVT25-GC $1375.00
Bronze Cerakote AA-ENDO-CVT25-BRC $1375.00
3-Gallon Tank 4-Corner Valves Raw AA-ENDO-CVT43-RAW $1569.00
Black Cerakote AA-ENDO-CVT43-BC $1609.00
Gray Cerakote AA-ENDO-CVT43-GC $1609.00
Bronze Cerakote AA-ENDO-CVT43-BRC $1609.00
2-Corner Valves Raw AA-ENDO-CVT23-RAW $1295.00
Black Cerakote AA-ENDO-CVT23-BC $1335.00
Gray Cerakote AA-ENDO-CVT23-GC $1335.00
Bronze Cerakote AA-ENDO-CVT23-BRC $1335.00
Compressor Upgrade (for existing ENDO tanks) AA-ENDO-COMP-UPGRADE $800.00
Compressor Analog Adapter Harness AA-ENDO-C-ADAPTER $100.00
CT Endcaps (Requires (2) for upgrading ENDO-T to ENDO-CT. Requires (1) for upgrading an ENDO-VT23 to ENDO-CVT) Raw AA-ENDO-CAP-CT-RAW $95.00
Gray Cerakote AA-ENDO-CAP-CT-GC $115.00
Bronze Cerakote AA-ENDO-CAP-CT-BRC $115.00
Black Cerakote AA-ENDO-CAP-CT-BC $115.00

THE FUTURE IS INSIDE

AccuAir's ENDO-TankTM product line is the result of years of engineering accomplishments and represents the largest leap forward in air tank technology for 100 years. The system allows tanks to be built modularly with all precision machined aluminum components and with a bolted construction. As a result, these tanks are weld-free and leak-free. Ports are machined directly into the solid aluminum body and are flush with the outside of the tank. Modular construction allows the end-caps to be removed allowing for never before imagined feature combinations to go inside the tank.

  • Modular and bolted construction eliminates leaky welds and makes disassembly possible for upgrades.
  • Extruded internal rails house embedded mounting locations along the tank providing clamp-less attachment of ENDO-MountTM brackets and accessories.
  • The only DOT Approved Aluminum air tank for air suspension. Certified to 200 psi and tested to an incredible 1324 psi burst pressure.
  • Available Valve-Integrated end caps allow the simplest and most compact air management install.
  • The upgradeable air management platform with modular new product releases from AccuAir.

EXTRUDED CORE

Extruded internal rails house embedded mounting locations along the tank providing clamp-less attachment of ENDO-MountTM brackets.

MODULAR PLATFORM

Modular and bolted construction eliminates leaky welds and makes disassembly possible for upgrades.

HARDWARE INCLUDED

Includes black nickel plated fittings and a built in 400 psi blow-off valve to ensure safe use.

ENDOTM QUICK RELEASE

Included ENDO-QRTM quick release mounting system allows easy installation and even easier air management assembly outside the vehicle.